![]() ![]() Please contact Micrographics if you require assistance using Shared Coordinates on your BIM project. Note that True North corresponds to the Civil 3D model.Īnother take on this (Infraworks, Revit, Civil 3D and Navisworks) is given by John Sayre in the following link: This is what is necessary for the Revit Levels to report their height above sea level if required. Make the current coordinate system the one shared in from the XML file. What is important is that the start and end of the vector that is indicated are consistent with how it was defined in Civil 3D for the XML export.Ĭhoose the relevant XML file to set the Shared Coordinates. In this case it was not found to be necessary. Note how the instructions indicate that the “y” direction is supposed to be “Up”. Now one must set the shred coordinates of the Revit file from the Civil 3D exported XML file.įor the origin select the same point on the boundary that was used to export the shared coordinates from Civil 3D.Īnd the endpoint similarly. Export coordinates and elevation from Autodesk Civil 3D to external. Two individual installations for Autodesk Civil 3D and Autodesk Revit. Typically, we would like the elevation of the survey point in Revit to be at 0 m (sea level), so make sure the polyline is also at zero.Ĭlick OK and proceed to export the file to XML format. Shared Reference Point extension provides functionality to export known points and elevations from Autodesk Civil 3D to an external file, in which Autodesk Revit. Select a first and second point that defines a vector. Right Mouse Click (RMC) on the tool for exporting a shared reference point for Autodesk Revit and “Execute”. What we would like now is for Revit to share the same coordinate system as the Civil 3D file. Shared Reference Point for Autodesk Revit. Autodesk Shared Reference Point for Autodesk Revit 2020 é executado nos seguintes sistemas operacionais: Windows. Revit : Autodesk Reference Point Extensions for Revit Autodesk. Inicialmente foi adicionado ao nosso banco de dados em. This is the shape of the outline as seen in Revit. A versão mais recente de Autodesk Shared Reference Point for Autodesk Revit 2020 é atualmente desconhecida. ![]() Shown here is a closeup of the project outline. Here is the island on which the project is located. On this case, UTM 40S is the coordinate system that is used. After the online map data has been set and the coordinate system chosen, drawing line from (0,0,0) to a corner of the project and then zooming to extents exposes the entire coordinate system. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |